How to Clean Car Tyres Effectively and Add Shine: A Comprehensive Guide

Keeping your car tyres clean and shiny not only enhances the overall appearance of your vehicle but also helps maintain the rubber and prolong its lifespan. In this detailed guide, we will walk you through the steps to effectively clean your car tyres and make them shine like new.

Why Clean Your Tyres?

Tyres accumulate dirt, brake dust, and grime over time, which can lead to degradation of the rubber. Regular cleaning helps prevent this build-up and enhances the aesthetics of your vehicle. A clean tyre also provides better traction and improves your vehicle's handling.

Supplies You Will Need

 Before you start, gather the following supplies:

- *Foxcare Wheel Cleaner/Degreaser*: Specially formulated cleaners that break down dirt and grime.

- *Soft-Bristle Brush or Tyre Brush*: This helps scrub away debris without damaging the rubber.

- *Bucket of Water*: For rinsing and mixing solutions.

- *Foxcare Rags Microfiber Cloth or Sponge*: For drying and buffing.

- *Foxcare Extreme shine for tyres or Tyre Polish*: spread or spray to give that glossy finish.

- *Hose or Pressure Washer*: For rinsing the tyres.

Step-by-Step Instructions

 Step 1: Preparation

1. *Choose the Right Location*: Park your car in a shaded area to prevent the cleaning products from drying too quickly, which can leave residue.

2. *Cool Down the Tyres*: Ensure the tyres are cool to the touch. Cleaning hot tyres can cause the cleaner to evaporate too quickly, reducing effectiveness.

Step 2: Rinse the Tyres

 - Use a hose or pressure washer to spray water on the tyres. This initial rinse will remove loose dirt and debris, making the cleaning process easier.

Step 3: Apply Foxcare Wheel Cleaner

 - Generously spray the Foxcare Wheel Cleaner or degreaser onto the surface of each tyre. Focus on areas with visible grime.

- Allow the cleaner to sit for a few minutes to penetrate the dirt.

Step 4: Scrub the Tyres

 - Using the soft-bristle brush, scrub the tyres thoroughly. Pay special attention to the treads and sidewalls where dirt tends to accumulate.

- Use circular motions and don’t hesitate to apply some pressure to lift stubborn grime.

Step 5: Rinse Thoroughly

- Once scrubbed, rinse the tyres again with water to remove all traces of the cleaner and loosened dirt. Make sure there’s no residue left.

Step 6: Dry the Tyres

 - Use a microfiber cloth to wipe down the tyres. If you prefer, you can let them air dry, but make sure they are completely dry before applying any Foxcare Extreme shine for tyres product.

Step 7: Apply Foxcare Extreme shine for tyres

 - Choose a Foxcare Extreme shine for tyres product that suits your preference—either a gel or spray.

- If using a gel, apply it with a clean applicator sponge to ensure even coverage. For sprays, hold the can about 6-12 inches from the tyre and spray evenly.

Step 8: Buff If Necessary

- After applying the Foxcare Extreme shine for tyres, you may want to buff the tyres with a clean cloth to achieve an even, glossy finish. This also helps to remove any excess product.

Step 9: Final Inspection

 - Step back and admire your work! Ensure that the tyres are clean, shiny, and free of any streaks or residue.

Additional Tips 

- *Frequency*: Clean your tyres every few weeks or as needed, especially if you frequently drive on dirt roads or in inclement weather.

- *Avoid Harsh Chemicals*: Stay away from bleach or acid-based cleaners, as they can damage the rubber.

- *Check Tyre Pressure*: While cleaning, it’s a good opportunity to check your tyre pressure and tread depth.

Conclusion

By following these steps, you can keep your car tyres looking clean and shiny, enhancing both the aesthetics and performance of your vehicle. Regular maintenance will not only make your car stand out but also help in maintaining the health of your tyres.

If questions arise, don’t hesitate to contact our Expert Care Team. You’re part of the family now, and we’ve got your back!